Create Your Signature Look

For necks that have a fretboard which does not require finishing.

Example: Maple Neck with Rosewood Fretboard

For necks that have a fretboard which does require finishing.

Example: Maple Neck with Maple Fretboard

Base price for a raw "ready-to-paint" LP-Jr. style husk, without hardware. Stripping fees apply. Additional options are available.

Base price for a raw "ready-to-paint" LP-Standard style husk, without hardware. Stripping fees apply. Additional options are available.

Base price for a raw "ready-to-paint" LP-Custom style husk, without hardware. Stripping fees apply. Additional options are available.

For any other non-LP style set-neck instruments, a custom quote will need to be generated.

Get that "vintage" ambered look to your finish with the application of amber tinted lacquer on your body. Available in "light", "medium", or "heavy" ambering.

Paint the back and sides of your body with one color and the top of your body with another!

Add a pop of color to your finish by filling the pores/grain of your body with a contrasting colored grain-filler! This only works on bodies that have "open" grain, like Ash, Mahogany, and similar body woods.

Add poly sealer coats to your body to help create a super-smooth base layer for your nitro finish!

Get that classic look with a color stripe on your body!

Keep a clean band of wood exposed around the top-edge or back-edge of your body to mimic the look of binding. Price is per side.

Highlight the grain of your figured Maple top with a grain enhancement process! This works best on clean, bright, figured Maple. This is a single stage staining process to bring out the figuring. Note: Not as deeply colored as a full "double-stain" finish!

Shift the tone of your "raw" maple neck from white, to a warm golden-brown, for that vintage neck look! Available in "light", "medium", and "heavy" tint.

Keep a clean band of wood exposed around the top-edge of your headstock to mimic the look of binding. *Only applicable to colored headstocks.

Add a pop of color to your neck finish by filling the pores/grain with a contrasting colored grain-filler! This only works on necks that have "open" grain, like Mahogany, Limba, and similar neck woods.

Spray your headstock the same color as your body for a classy, color-coordinated look, or choose another color for a unique vibe!

Spray your neck the same color as your body, or choose another color for a unique look!

Minor surface scratches and dings, with more focus on edge wear. A mild finish patina reflects the natural aging and de-glossing of nitro. Finish checking mimics the natural cracking of the top coat due to changes in weather.

Moderate distressing with a worn-in, well-traveled feel. A modest amount of scratches, dings, and dents, with a few wear spots, finish chipping, and naturally produced finish checking.

Highly-played but not over-done distressing, this aging process produces greater amounts of finish wear, larger areas of finish removal, and more pronounced finish checking, dents, and dings.

If you have a custom or replacement decal for your neck, we will apply it to your headstock. We do not apply Fender or Gibson decals to non-factory, aftermarket necks.

For a vintage style sunburst on an Alder body, we can bleach/white-wash the wood, like Fender does, to get the correct "vintage" coloring.

If your headstock has an inlaid logo, we will mask it off and scrape back the new finish to create a clean edge around it before clearing the headstock.

If your neck has plastic binding on the fretboard or headstock, we have to protect it during the refinish process and scrape the new finish back to reveal the binding again.

If your body has plastic binding, we have to protect it during the refinish process and scrape the new finish back to reveal the binding again. The price is per side (front / back).

If you have an open-grain wood on your body or neck that needs to be filled to acheive a smooth, uniform, surface finish.